Camaro V8-5.7L VIN G (1998)
2.
Apply a 10 mm x 30 mm (3/8 in x 1-3/16 in) piece of flocking tape to the backside of the door handle bezel. Refer to the arrow in the illustration.
Clean the surface of the door handle bezel before applying the tape using one of the cleaners listed below. Leave a 1 mm (1/16 in) gap between the
edge of the tape and the door lock knob opening. Refer to the illustration.
3.
Reinstall the inside door handle bezel. Refer to the Handle Bezel Replacement - Inside procedure in the Doors subsection of the Body &
Accessories section of the Service Manual (SI2000 Document ID # 364217).
Parts Information
The part number listed below has two sheets, 216 mm x 305 mm (8-1/2 in x 12 in).
Parts are currently available from GMSPO.
Cleaners
^
3M(R) General Purpose Adhesive Cleaner, P/N 08984
^
Dominion Sure Seal, Sure Solve Cleaner, Stock BSS
^
Kent Acrosol
Warranty Information
For vehicles repaired under warranty, use the table.
