chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Windnoise/Water Leak - Diagnostic Guide|Page 10548 > < Windnoise/Water Leak - Diagnostic Guide|Page 10546
Page 7
background image

The weatherstrip in the area indicated shows where the weatherstrip relaxes and loses contact with the door glass. This generates windnoise. Refer to
Figure 11.

Correction

Loosen the "B" pillar weatherstrip retaining screw and tighten the screw while holding the weatherstrip.

Condition

There is windnoise and/or water leaks in the front or rear at the door belt line (convertible, hard top, T-top models).

Correction

1.

Insert the push-in retainers. Refer to Figure 12.

2.

Ensure that the muket has no folds. Refer to item 1 in Figure 12.

3.

Ensure that the muket is in contact with the side door glass when the door is closed. Refer to item 2 in Figure 12.

Condition

There is windnoise and/or water leaks at the T-top butt joints.

Cause

^

The butt joint surfaces between the panel and the body details may have improper contact.

^

The door glass may not be adjusted properly for height or "tip in" contact.

Correction

Windnoise/Water Leak - Diagnostic Guide|Page 10548 > < Windnoise/Water Leak - Diagnostic Guide|Page 10546