Camaro V8-5.7L VIN G (1998)
7. Install the NEW crankshaft balancer bolt.
7.1.
Tighten the crankshaft balancer bolt a first pass to 50 Nm (37 ft. lbs.).
7.2.
Tighten the crankshaft balancer bolt a second pass to 140 degrees using the J36660.
8. Remove the J42386-A.
9. Install the power steering cooler, if removed, to the plastic support.
10. Install the transmission oil cooler lines to the radiator.
^
Tighten the oil cooler line connections to 27 Nm (20 ft. lbs.).