Camaro V8-5.7L VIN G (1998)
Refrigerant Pressure Sensor / Switch: Service and Repair
A/C Refrigerant Pressure Sensor Connector
A/c Refrigerant Pressure Sensor
Remove or Disconnect
1. Electrical connector at sensor.
2. Sensor and seal.
^
Sensor is mounted on a Schrader type valve so it is not necessary to discharge the refrigeration system.
^
Discard seal.
Install or Connect
1. New seal to sensor fitting.
^
Coat seal with mineral base 525 viscosity refrigerant oil.
2. Sensor.
Tighten
^
Sensor to 6 N.m (53 lb. in.).
3. Electrical connector to sensor.