Camaro V8-5.7L VIN G (1998)
Fuel Supply Line: Service and Repair
Fuel Filter to Tank
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Perform the Fuel Pressure Release Procedure.
3. Drain the fuel tank.
4. Raise the vehicle.
5. Clean all fuel and EVAP pipe and hose connections and the surrounding areas before disconnecting in order to avoid possible contamination of the
fuel system.
6. Remove the fuel tank. Refer to Fuel Tank Replacement.
7. Fold back the left fuel tank insulator.
Fuel Pipes
8. Remove the rear fuel feed pipe (3), the rear return pipe (2), the EVAP pipe (1), and the fuel tank vent valve hose (4) from the fuel sender pipes.
Fuel Tank Components
9. Disconnect the EVAP hose (5) from the EVAP canister vent solenoid.
10. Remove the rear fuel and EVAP pipes.
11. Cap the fuel pipes in order to prevent possible fuel system contamination.
INSTALLATION PROCEDURE
1. Remove the caps from the fuel pipes.
