Camaro V8-5.7L VIN G (1998)
Body Control Module: Description and Operation
Power Requirements
The BCM will operate properly with a system voltage of 9-16 volts.
Operating current measured at the BCM battery terminals in the awake mode should not exceed the following values:
^
75 milliamps with the ignition switch in the OFF position
^
250 milliamps with the ignition switch in the RUN position
Operating current measured at the BCM battery terminals in the sleep mode should not exceed the following values:
^
2 milliamps on vehicles without theft deterrent (UA6)
^
3 milliamps on vehicles with theft deterrent (UA6)
Operating current measured at the BCM IGN1 and IGN3 terminals should not exceed 15 milliamps.
