Camaro V8-5.7L VIN G (1998)
Fuel Tank Pressure Sensor: Service and Repair
Fuel Sender Components
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Perform the Fuel Pressure Release Procedure.
3. Drain the fuel tank. Refer to Fuel Tank Draining Procedure
4. Remove the fuel tank. Refer to Fuel Tank Replacement.
5. Remove the fuel pressure sensor (1).
INSTALLATION PROCEDURE
1. Install the fuel pressure sensor (1).
2. Install the fuel tank. Refer to Fuel Tank Replacement
3. Refill the fuel tank.
4. Install the fuel filler cap.
5. Connect the negative battery cable.
6. Inspect for leaks.
A. Turn the ignition switch ON for 2 seconds.
B. Turn the ignition switch OFF for 10 seconds.
C. Turn the ignition switch ON.
D. Check for fuel leaks.
