Camaro V8-5.7L VIN G (1998)
Oxygen Sensor: Service and Repair
Bank 2 (Right) Sensors
CAUTION: Take care when handling the heated oxygen sensor. The in-line electrical connector and louvered end must be kept free of grease, dirt or
other contaminants. Also, avoid using cleaning solvents of any type. Do not drop or roughly handle the heated oxygen sensor. A dropped sensor is a bad
sensor.
REMOVAL PROCEDURE
The heated oxygen sensor may be difficult to remove when the engine temperature is below 48°C (120°F). Excessive force may damage the
threads in the exhaust manifold or exhaust pipe. It may be necessary to lower the exhaust system to gain sufficient access to a HO2S and/or it's
connector.
1. Raise the vehicle.
2. Disconnect the HO2S electrical connector.