Camaro V8-5.7L VIN G (1998)
Fluid Pressure Sensor/Switch: Service and Repair
REMOVAL PROCEDURE
1. Remove the transmission oil pan and filter.
2. Disconnect the internal wiring harness electrical connectors from the following components:
^
Transmission pressure switch (1)
^
1-2 shift control solenoid (2)
^
2-3 shift control solenoid (3)
^
Pressure control solenoid (4)
^
TCC PWM solenoid (5)
^
3-2 control solenoid (6)
3. Remove the TCC PWM solenoid retainer.
4. Remove the TCC PWM solenoid in order to access one of the TCC solenoid retaining bolts.
