Camaro V8-5.7L VIN G (1998)
Torque Converter Clutch Solenoid: Service and Repair
REMOVAL PROCEDURE
^
Tools Required
^
J 28458 Power Piston Seal Protector and Diaphragm Retainer Installer
1. For the 5.7L remove the oxidation catalytic converter.
2. Remove the transmission oil pan and the filter.
3. Disconnect the transmission harness 20-way connector from the transmission internal harness pass-through connector.
Depress both tabs on the connector and pull straight up; do not pry the connector.
4. Disconnect the internal wiring harness electrical connectors from the following components:
^
Transmission pressure switch (1)
^
1-2 shift control solenoid (2)
^
2-3 shift control solenoid (3)
^
Pressure control solenoid (4)
^
TCC PWM solenoid (5)
^
3-2 control solenoid (6)
