Camaro V8-5.7L VIN G (1998)
Gear Lockout Solenoid: Service and Repair
Reverse Lockout Solenoid
REMOVAL PROCEDURE
^
Tools Required
^
J 41099 Solenoid Socket
1. Raise and suitably support the vehicle.
2. Disconnect the electrical connector (1) from the reverse lockout solenoid (2).
3. Place a drain pan under the transmission in case any fluid drips out.
4. Remove the reverse lockout solenoid using J 41099.
5. Remove the reverse lockout assembly bolt.
6. Remove the reverse lockout assembly, if necessary.
INSTALLATION PROCEDURE
^
Tools Required
^
J 41099 Solenoid Socket