Camaro V8-5.7L VIN G (1998)
11. Install the TCC PWM solenoid to the control valve body.
12. Install the TCC PWM solenoid retainer.
13. Tighten the control valve body bolts in a spiral pattern starting from the center, as indicated by the arrows.
^
Tighten the control valve body bolts (in sequence) to 11 Nm (97 inch lbs.).
NOTICE: Torque valve body bolts in a spiral pattern starting from the center. If the bolts are torqued at random, valve bores may be distorted and
inhibit valve operation.
14. Connect the internal wiring harness electrical connectors to the following components:
^
Transmission pressure switch (1)
^
1-2 shift control solenoid (2)
^
2-3 shift control solenoid (3)
^
Pressure control solenoid (4)
^
TCC PWM solenoid (5)
