Camaro V8-5.7L VIN G (1998)
3.
Clean the surface to be sealed using one of the following, or an equivalent:
^
3M(R) General Purpose Adhesive Cleaner, P/N 08984
^
Dominion Sure Seal, Sure Solve Stock BSS
^
Kent Acrosol(TM)
4.
Seal the flange(s) using one of the following, or an equivalent:
^
3M(R) Ultropro(TM) Autobody Sealant
^
Kent High Tech Seam Sealer Clear 10200
^
Dominion Sure Seal Heavy Duty Drip Check LSC Item # 9019
Condition
Water drips from the left hand side strut attachment on the deck lid (hard top, T-top models).
Cause
A plug may be missing from under the left side spoiler. Refer to Figure 28.
Correction
Remove the spoiler and install plug, P/N 10231979.
General Information on Door Glass Adjustments
Important:
On frameless door glass, always check and verify door alignment to the body prior to adjusting the door glass. Some items may require that the door
glass be adjusted. It is important that the door glass be able to contact and seal to the weatherstrip when operating the glass with the door closed
("reroll"). Always check the ability to "reroll the door glass" with the door in the closed position when door glass adjustments are made.
The glass is not parallel to the weatherstrip or is not contacting the up stops at the same time.
1.
Lower the glass part way and raise to within 25 mm (1 in) from the weatherstrip.
