Camaro V8-6.2L (2010)
Repair/Rear Suspension).
20. Remove the rear wheel hub and knuckle assembly. Refer to Knuckle Replacement (See: Steering and Suspension/Suspension/Rear
Knuckle/Service and Repair/Rear Suspension).
21. Remove the rear strut assembly to lower control arm retaining bolt (2) and nut (1).
Discard the nut.
Note: The lower control arm to subframe retaining bolt (1) and nut (2) eccentric washers (3) that are used to adjust the rear suspension camber.
One eccentric washer (3) is mounted directly to the head of the lower control arm to subframe retaining bolt (1).
22. Mark the eccentric washers (3) with reference to their seating position relative to the subframe.
