Camaro V8-6.2L (2010)
10. Prime the repair area using the urethane primer. Refer to Adhesive Installation of Windshields in SI.
11. Install the windshield glass assembly into the opening. Refer to Adhesive Installation of Windshields in SI.
12. Reinstall the windshield side garnish moldings. Refer to Windshield Side Garnish Molding Replacement in SI.
13. Reinstall the remote control door receiver antenna. Refer to Remote Control Door Lock Receiver Replacement in SI.
14. Reinstall the inside rearview mirror. Refer to Inside Rearview Mirror Replacement in SI.
15. Reinstall the air inlet grille panels. Refer to Air Inlet Grille Panel Replacement in SI.
5. Road test the vehicle and verify that the condition has been corrected.
* We believe this source and their products to be reliable. There may be additional manufacturers of such products/materials. General Motors does not
endorse, indicate any preference for, or assume any responsibility for the products or material from this firm or for any such items that may be available
from other sources.
Parts Information
*This product is currently available from Kent Industries (1-888-YES-KENT).
Warranty Information
For vehicles repaired under warranty, use the table above.
Disclaimer
