Camaro V8-6.2L (2010)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor Replacement
Front Wheel Speed Sensor Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
1. From inside the engine compartment, disconnect the front wheel sensor electrical connector (1).
2. Release the wheel speed sensor electrical connector retainer from the inner wheel house panel.
3. Feed the wheel speed sensor electrical connector and harness through the wheel house panel closeout.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
5. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
).
6. Release the wheel speed sensor wire harness retainer (1) from the outer wheel house panel.