Camaro V8-6.2L (2010)
Brake Rotor/Disc: Removal and Replacement
Front Brake Rotor Replacement
Front Brake Rotor Replacement
Special Tools
*
J-41013 - Rotor Resurfacing Kit
*
J-42450-A - Wheel Hub Resurfacing Kit
For equivalent regional tools, refer to Special Tools (See: Tools and Equipment).
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
).
Note: The brake caliper bolts must be replaced any time they are removed. Do not reuse the disc brake caliper bolts.
3. Remove and discard the brake caliper bolts (1).
Caution: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible
brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which
may cause damage to the brake hose and in turn may cause a brake fluid leak.
4. Remove the brake caliper assembly and support with heavy mechanics wire or equivalent.
