Camaro V8-6.2L (2010)
3. Install the master cylinder reservoir (1).
Carefully press the reservoir straight downward.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the master cylinder reservoir bolts (1) and tighten to 8 Nm (71 lb in).
5. Connect the clutch master cylinder supply hose, if equipped.
6. Connect the brake fluid level indicator switch electrical connector.
7. Fill the master cylinder reservoir. Refer to Master Cylinder Reservoir Filling (See: Brake Master Cylinder/Service and Repair/Procedures/Master
Cylinder Reservoir Filling).
