Camaro V8-6.2L (2010)
5. Carefully separate the EBCM from the brake pressure modulator valve (BPMV) by pulling straight away from the BPMV.
Do not force the components apart.
Installation Procedure
1. Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
2. Install the EBCM (1) to the BPMV.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the EBCM bolts (1) and tighten in a cross pattern to 3 Nm (27 lb in).
4. Connect the EBCM electrical connector.
5. Program the EBCM. Refer to Control Module References (See: Testing and Inspection/Programming and Relearning).
6. Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle).
