Camaro V8-6.2L (2010)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Oil Manifold Replacement
Valve Lifter Oil Manifold Replacement
Removal Procedure
1. Remove the intake manifold. Refer to Intake Manifold Replacement (See: Intake Manifold/Service and Repair)
2. Disconnect the engine harness electrical connector from the oil pressure sensor and oil manifold.
3. DO NOT lift the valve lifter oil manifold by the electrical lead frame.
4. Remove the valve lifter oil manifold bolts (2).
5. Remove the valve lifter oil manifold (1).