Camaro V8-6.2L (2010)
2. Install the valve lifter oil manifold (1) to the engine.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution)
3. Install the valve lifter oil manifold bolts (2) and tighten to 25 Nm (18 lb ft).
4. Connect the engine harness electrical connector (1) to the oil pressure sensor.
5. Install the intake manifold. Refer to Intake Manifold Replacement (See: Intake Manifold/Service and Repair)