Camaro V8-6.2L (2010)
5. Pull back on the EOC pipe to disengage the pipe from the EOC pipe fitting.
6. Remove the J 41623-B - 3/8 Inch Cooler Quick Connect Tool or DT 47731 - 1/2 Inch Quick Connect Release Tool from the EOC pipe.
Installation Procedure
Note: Inspect the EOC pipe fitting and retaining clip for signs of wear or damage. Replace the components if necessary.
1. Install the EOC pipe into the EOC pipe fitting.
A distinct snap should be heard or felt when assembling the EOC pipe to the fitting.
2. To ensure the cooler line is properly installed, give the cooler pipe a gentle pull.
