Camaro V8-6.2L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: Always install a NEW water pump gasket.
1. Install the water pump (2) to the engine block and tighten the bolts (1) to 30 Nm (22 lb ft).
2. Connect the heater inlet and outlet hose to the water pump. Refer to Heater Inlet And Outlet Pipe Replacement (See: Cooling System/Coolant
Line/Hose/Service and Repair/Heater Inlet And Outlet Pipe Replacement).
3. Connect the radiator outlet hose to the water pump. Refer to Radiator Outlet Hose Replacement (See: Cooling System/Radiator Hose).
4. Connect the radiator inlet hose to the water pump. Refer to Radiator Inlet Hose Replacement (See: Cooling System/Radiator Hose).
5. Install the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement (See: Drive Belts, Mounts, Brackets and Accessories/Idler
Pulley/Service and Repair).
6. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement - Accessory (See: Drive Belts, Mounts, Brackets and
Accessories/Drive Belt Tensioner/Service and Repair).
7. Fill the cooling system. Refer to Cooling System Draining and Filling (See: Cooling System/Service and Repair/Cooling System Draining and
Filling).
8. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair).