Camaro V8-6.2L (2010)
8. Inspect the drive belt (1) for proper installation and alignment.
9. Rotate the balancer (1) and additional 360 degrees to ensure proper belt installation.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
10. Reposition the camshaft position sensor/actuator wire harness bracket and tighten the bolts as required.
Tighten the bolts to 12 Nm (106 lb in).
11. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory (See: Drive Belt Replacement - Accessory).