Camaro V8-6.2L (2010)
9. Insert the J-38125-12A tool to release the terminals by inserting the tool into the terminal release cavity.
10. While holding the removal tool in place, gently pull the wire out of the back of the connector. Always remember never use force when pulling a
terminal out of a connector.
11. Repair the terminal by following the Repairing Connector Terminals (See: Testing and Inspection/Component Tests and General
Diagnostics/General Electrical Diagnostic Procedures/Connector Repairs/Repairing Connector Terminals) procedure.
12. Insert the repaired terminal back into the cavity. Repeat the diagnostic procedure to verify the repair and reconnect the connector bodies.
FCI Connectors
FCI Connectors
Special Tools
*
EL-38125-580 - Terminal Release Tool Kit
*
J-38125-556 - Terminal Release Tool
*
J-38125-560 - Terminal Release Tool
