Camaro V8-6.2L (2010)
Hose/Line HVAC: Service and Repair
Air Conditioning Compressor Hose Seal Replacement
Air Conditioning Compressor Hose Seal Replacement
Removal Procedure
1. Remove the seal washer from the A/C refrigerant component.
2. Inspect the seal washer for any signs of damage.
3. Inspect the A/C refrigerant components for damage or burrs. Repair or replace as necessary.
Note: DO NOT reuse sealing washer.
4. Discard the sealing washer.
Installation Procedure
Note: Flat washer type seals do not require lubrication.
1. Inspect the new seal washer for any signs of cracks, cuts, or damage.
Do not use a damaged seal washer.
2. Using a lint-free clean, dry cloth, clean the sealing surfaces of the A/C refrigerant components.
3. Carefully install the new seal washer onto the A/C refrigerant component.
4. The washer must completely bottom against the surface of the fitting.
Note: After tightening the A/C components, there should be a slight sealing washer gap of approximately 1.2 mm (3/64 in) between the A/C line
and the A/C component.
5. Assemble the remaining A/C refrigerant components. Refer to the appropriate repair procedure.
