Camaro V8-6.2L (2010)
4. Remove the cap from the power steering fluid reservoir (1) inlet port. Remove the plug from the power steering fluid cooler outlet hose (2).
Connect the power steering fluid cooler outlet hose to the power steering fluid reservoir.
5. Remove the plug from the power steering fluid cooler outlet hose (3). When fluid starts to flow from the hose, cap the hose with your thumb.
6. Remove the cap from the power steering fluid cooler outlet port (1) and quickly connect the power steering fluid cooler outlet hose to the power
steering fluid cooler outlet port.
7. Remove the drain pans.
8. Lower the vehicle.
9. Clean any excess power steering fluid from the vehicle.
10. Remove the cover from either the air conditioning compressor or the generator, as applicable.
11. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Filters/Air Cleaner Housing/Service and Repair) for the V6
engine or to Air Cleaner Assembly Replacement (See: Filters/Air Cleaner Housing/Service and Repair) for the V8 engine.
12. Bleed the power steering system. Refer to Power Steering System Bleeding (See: Steering and Suspension/Steering/Power Steering/Power
Steering Bleeding/Service and Repair).
