Camaro V8-6.2L (2010)
9. Disengage tension on the radiator inlet hose clamp (1) at the radiator using J 38185 - Hose Clamp Pliers.
10. Remove the radiator inlet hose (2) from the radiator.
11. Remove the radiator inlet hose from the vehicle (2).
Installation Procedure
1. Install radiator inlet hose to the vehicle.
Caution: Make sure the reference marks on the hoses and the radiator are lined up. A twist on the hose would place strain on the radiator fitting
which could cause the fitting to crack or break.
Note: Lubricate the inside diameters of the hose with clean coolant prior to installation.
2. Install the radiator inlet hose (2) to the radiator.
3. Engage tension on the radiator inlet hose clamp (1) at the radiator using J 38185 - Hose Clamp Pliers.
