Camaro V8-6.2L (2010)
Caution: A special anti-seize compound is used on the oxygen sensor threads. New service sensors should already have the compound applied to
the threads. Coat the threads of a reused sensor with anti-seize compound P/N 5613695 or equivalent.
1. Install the HO2S (2) to the right catalytic converter and tighten to 42 Nm (31 lb ft).
2. Connect the HO2S electrical connector (1).
3. Lower the vehicle.
4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
