Camaro V8-6.2L (2010)
Note: Install a NEW O-ring to the camshaft sensor
Note: Before installing the camshaft sensor, apply a small amount of clean motor oil to the O-ring (3).
1. Install a NEW O-ring (3) to the CMP sensor.
2. Install the CMP sensor (2) to the engine front cover.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the CMP sensor to engine front cover retaining bolt (1) and tighten to 9 Nm (80 lb in).