Camaro V8-6.2L (2010)
Instrument Panel Control Module: Customer Interest
Electrical - Cluster Needle(s) Stick Intermittently
TECHNICAL
Bulletin No.: 09-08-49-011
Date: June 15, 2009
Subject: Instrument Panel Cluster Needle(s) Stick Intermittently (Replace Instrument Panel Cluster)
Models:
2010 Chevrolet Camaro
Condition
Some customers may comment that one of the instrument cluster needles becomes stuck at a specific value. This may be an intermittent condition based
on the interior temperature of the vehicle. Clusters that are vulnerable to this condition will have the pointer stick at elevated interior temperatures or
when the cluster has been operating for a period of time.
Cause
This condition may be caused by cluster needles that were installed too deep on the gage.
Correction
Replace the instrument panel cluster. Refer to Instrument Cluster Replacement in SI. Reprogram the instrument panel cluster using the Multiple
Diagnostic Interface (MDI) and Service Programming System (SPS) with the latest TIS2WEB calibrations after replacement. Refer to Instrument Cluster
Reprogramming in SI.
Parts Information
Important:
DO NOT obtain parts from GMSPO. Contact a GM authorized Electronic Service Center (ESC) for replacement.
To identify the correct part number, use the Global Diagnostic System (GDS) application or remove the unit for inspection.
Warranty Information
Disclaimer
