Camaro V8-6.2L (2010)
10. Remove the brake caliper from the knuckle.
Warning: Refer to Brake Fluid Irritant Warning (See: Brakes and Traction Control/Service Precautions/Technician Safety Information/Brake
Fluid Irritant Warning).
11. Support the brake caliper (4) with heavy mechanic's wire, or equivalent (3).
12. Clean all dirt and foreign material from the brake hose and the brake pipe fittings.
13. Detach the brake hose (1) from the upper control arm mounted brake hose retaining bracket (5).
14. Position the suitable frame support table under the vehicle.
15. Using suitable frame support table, lower the vehicle to the frame support table.
16. Remove the rear sub frame to rear chassis rail retaining fasteners.
17. Carefully raise the vehicle from the rear frame assembly.
18. Remove the stabilizer shaft link. Refer to Stabilizer Shaft Link Replacement (See: Stabilizer Bar/Stabilizer Link/Service and Repair/Rear
Suspension).
19. Remove the stabilizer shaft. Refer to Stabilizer Shaft Replacement (See: Stabilizer Bar/Service and Repair/Rear Suspension).
