Camaro V8-6.2L (2010)
46. Align the marks on the eccentric washers (3) with the marks on the subframe.
Note: Make sure that the vehicle is positioned on a suitable hoist to load the rear suspension bushes to the correct position.
47. Tighten the lower control arm to subframe retaining bolt (1) and nut (2) and tighten to 115 Nm (85 lb ft).
48. Tighten the lower control arm to knuckle retaining bolt (2) and nut (1) a first pass to 40 Nm (30 lb ft) and a final pass 120 degrees.
Note: Make sure that the vehicle is positioned on a suitable hoist to load the rear suspension bushes to the correct position.
49. Tighten the trailing arm to subframe retaining bolt (2) and NEW nut (1) to 100 Nm (74 lb ft).
