Camaro V8-6.2L (2010)
14. Install the transmission oil pan and filter. Refer to Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement ().
15. If a NEW TCM has been installed into the vehicle, the NEW module needs to be reprogrammed. Refer to Service Programming System (SPS) (
See: Testing and Inspection/Programming and Relearning/Service Programming System (SPS)).
Note: The Service Fast Learn Adapts procedure must be performed when one of the following repairs have been made to the vehicle. Failure to
perform the procedure after one of the following repairs may result in poor transmission performance, as well as transmission DTCs being set:
*
Transmission internal service/overhaul
*
Valve body repair or replacement
*
Control solenoid valve assembly replacement
*
TCM software/calibration update
*
Any service in response to a shift quality concern
16. Perform the service fast learn adapts. Refer to Service Fast Learn Adapts (See: Testing and Inspection/Programming and Relearning).
