Camaro V8-6.2L (2010)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Replacement
Clutch Pedal Replacement
Removal Procedure
1. Disconnect the clutch pedal position sensor electrical connector.
2. Disconnect the clutch master cylinder push rod (1) from the clutch pedal pin (2).
3. Remove the clutch fluid reservoir (1) hose from the clutch pedal assembly, then plug hose.
Important: Cap the line to prevent fluid from entering the vehicle, place shop towels over the carpeting to prevent damage.
4. Disconnect the clutch actuator pipe assembly (2) from the clutch pedal assembly.