Camaro V8-6.2L (2010)
5. Remove the clutch pedal fasteners (3) from the cowl.
6. Remove the two clutch pedal fasteners (1) from the I/P.
7. Remove the clutch pedal assembly from the vehicle.
8. If replacing the pedal, transfer components as necessary.
Installation Procedure
1. Install the clutch pedal assembly into the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the fasteners (1) securing the clutch pedal assembly to the I/P and tighten to 20 Nm (15 lb ft).