Camaro V8-6.2L (2010)
Pressure Plate: Service and Repair
Clutch Assembly Replacement
Special Tools
DT-50194 - Clutch Disc Alignment Tool
Removal Procedure
1. Remove the manual transmission. Refer to Transmission Replacement (See: Manual Transmission/Transaxle/Service and Repair/Removal and
Replacement/Aisin AY6 - Manual Transmission/Transmission Replacement) for the Aisin AY6 transmission or Transmission Replacement (See:
Manual Transmission/Transaxle/Service and Repair/Removal and Replacement/Tremec 6-Speed - Manual Transmission/Transmission
Replacement) for the Tremec 6-Speed transmission.
2. Remove and discard the clutch pressure plate bolts.
3. Remove the clutch pressure plate and driven disc from the dowel pins on the flywheel.
Installation Procedure
Note: When the clutch driven plate requires replacement, the engine flywheel must also be replaced along with the clutch pressure plate as an assembly.