Camaro V8-6.2L (2010)
Drive/Propeller Shaft: Service and Repair
Two-Piece Propeller Shaft Replacement
Two-Piece Propeller Shaft Replacement
Removal Procedure
Note: The front and rear propeller shaft couplings can be serviced separately from the propeller shaft. If the propeller shaft coupling needs to be
serviced, proceed to steps 11, and 12.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the exhaust heat shield. Refer to Exhaust Muffler Intermediate Heat Shield Replacement (See: Engine, Cooling and Exhaust/Exhaust
System/Muffler/Service and Repair/Exhaust Muffler Intermediate Heat Shield Replacement).
3. Reference the rear propeller shaft couple to the rear drive flange (1).