Camaro IROC-Z V8-350 5.7L VIN 8 FI (1990)
Replace foam tape on the top cover retainer with loop portion of *3M # 06480 Scotchmate Hook and Loop Fastening System. Cut strip in half and install
a strip inboard of each latch location. (Refer to Figure 2).
1.
Remove old foam tape from garnish molding.
2.
Refer to Figure 2 which shows an exploded assembly, but only the garnish molding needs to be removed to access the old tape. Cut loop portion,
of 3M # 6480 Hook and Loop Fastening System, in half and install a strip inboard of each latch location along the length of the top cover retainer.
3.
Trim away any excess "loop" material.
CORRECTION FOR CONDITION (3):
Saw or grind off boss. File any burrs and paint cut area.
NOTICE:
Protect top cover, backlite and any exposed surfaces from metal filings. Use cardboard and tape, paint drop cover, etc. to protect exposed surfaces.