chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

SIR Driver Side Inflator Module - Deployment/Disposal|Page 5867 > < SIR Driver Side Inflator Module - Deployment/Disposal|Page 5865
Page 5
background image

Figure 6

17.

Separate the two banana plugs on the universal deployment harness that were shorted together in step 3. Refer to Figure 6.

NOTICE:

When the air bag deploys, the rapid gas expansion will create a substantial report. Notify all people in the immediate area of your intention
to deploy the inflator module.

NOTICE:

When the air bag deploys, the inflator module may jump approximately one foot in height. This is a normal reaction ot the inflator module
to the force of the rapid gas expansion inside the air bag.

CAUTION:

Deployment harness shall remain shorted and not be connected to a power source until the air bag is to be deployed. The inflator module
will immediately deploy the air bag when a power source is connected to it. Connecting the deployment harness to the power source
should always be the last step prior to deployment in the inflator module deployment procedure. Failure to follow procedures in the order
listed may result in personal injury.

SIR Driver Side Inflator Module - Deployment/Disposal|Page 5867 > < SIR Driver Side Inflator Module - Deployment/Disposal|Page 5865