Camaro RS V8-305 5.0L VIN E TBI (1990)
Impact Sensor: Service and Repair
Forward Sensors
Fig. 313 Forward Sensor Removal
1.
Deactivate airbag system as described under MAINTENANCE PROCEDURES/AIRBAG DEACTIVATION.
2.
Remove air cleaner, then raise and support vehicle.
3.
Remove radiator air upper baffle.
4.
Remove CPA and disconnect Forward Discriminating Sensor electrical connector behind radiator support.
5.
Remove forward discrimination sensor retaining bolts, then the sensor, Fig. 313.
6.
Reverse procedure to install, noting the following:
a. Install forward discriminating sensor with arrow pointing toward front of vehicle. Torque bolts to 25 inch lbs.
b. Following installation, activate airbag system as described under MAINTENANCE PROCEDURES/AIRBAG ACTIVATION.
c. Turn ignition switch to the On position and verify the ``Inflatable Restraint'' indicator flashes 7 to 9 times then turns Off. If indicator does not
respond, refer to DIAGNOSIS AND TESTING PROCEDURE/TESTING PROCEDURES/RETRIEVING TROUBLE CODES.
