chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Steering Stop - Crunching Noise|Page 5438 > < Steering Stop - Crunching Noise|Page 5432
Page 1
background image

Front Steering Knuckle: All Technical Service Bulletins
Steering Stop - Crunching Noise

Number:

91-490-3B

Section:

3B

Date:

MARCH 1992

Corporate Bulletin No.: A4

ASE No.: 233301

Subject:
STEERING STOP CRUNCH NOISE

Model and Year:
1990-91 CAMARO

CONDITION:
Some 1990-91 F-cars may exhibit a crunch type noise coming from the front of the vehicle during full right or left turning maneuvers that is referred to
as steering stop crunch.

CAUSE:
Movement of lower control arm steering stop on steering knuckle during full turn type maneuvers generates crunch type noise.

CORRECTION:
Apply a thin film (approximately 1 mm thick) of high temperature water resistant grease, P/N 12345996 (1.75 oz. tube) to the contacting surfaces of both
the steering stops and steering knuckles as shown in illustration.

PART AVAILABILITY:

Parts are currently available.

WARRANTY INFORMATION:

Labor Operation Number:
T1841

Labor Time:

Steering Stop - Crunching Noise|Page 5438 > < Steering Stop - Crunching Noise|Page 5432