chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Computer Command Control - Port Fuel Injection|Page 3907 > < Computer Command Control - Port Fuel Injection|Page 3905
Page 2
background image

signal as one of the inputs to control idle air, vehicle speed sensor diagnostics, and exhaust gas recirculation. If circuit 434 indicates a grounded P/N
switch, while in the drive range, the EGR would be inoperative and engine detonation may result. If circuit 434 always indicates drive (open), a drop in
idle speed may exist when the gear selector is moved into the drive range.

TEST DESCRIPTION: The numbers below refer to circled numbers on the diagnostic chart.

1.

Checks for a closed switch to ground in the park position.

2.

Checks for an open switch in drive range.

3.

Be sure the "Scan" tool indicates drive even while wiggling the shifter to test for an intermittent or misadjusted switch in drive.

Computer Command Control - Port Fuel Injection|Page 3907 > < Computer Command Control - Port Fuel Injection|Page 3905