chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

With Power Windows|Page 8401 > < With Power Windows
Page 2
background image

Armrest

REMOVE OR DISCONNECT

1. Screws (3 and 4) retaining armrest (2) to the door trim panel, the armrest hanger plate, and the trim pad switch and remote handle mount panel (5).
2. Armrest (2) from the door trim panel and the trim pad switch and remote handle mount panel (5).

INSTALL OR CONNECT

1. Armrest (2) to the door trim panel and the trim pad switch and remote handle mount panel (5).
2. Screws (3 and 4) tighten to 5 Nm (44 lb. in.).

Inside Lock Rod Knob

Lock Rod Knob

REMOVE OR DISCONNECT

1. Inside lock rod knob (20).
2. Slide lock rod knob (20) forward.
3. Insert a small flat-bladed tool behind the end of the lock rod knob (20) and pry it away from the rod.         

INSTALL OR CONNECT

1. Inside lock rod knob (20).
2. Insert end of the lock rod knob (20) through the hole in the trim pad switch and remote handle mount panel (5).
3. Slide the lock rod knob (20) rearward until the end of the rod engages the depression in the end of the lock rod knob (20).

Door Trim Panel

With Power Windows|Page 8401 > < With Power Windows