Caprice V6-229 3.8L VIN K 2-bbl (1982)
Window Regulator: All Technical Service Bulletins
Door Glass, Front - Disengaged From Front Run Channel
Number:
83-T-17
Section:
I
Date:
Feb., 1983
Subject:
FRONT DOOR GLASS - DISENGAGED FROM FRONT RUN CHANNEL - 1980 TO 1983 IMPALA, CAPRICE SEDANS AND
WAGONS
TO:
ALL CHEVROLET DEALERS
Front door glasses that become disengaged from the front run channels on 1980 to 1983 Impala, Caprice sedans and wagons can be
corrected by using the following procedure.
1.
Remove front door trim panel and loosen water deflector as described in Section 5 of the Fisher Body Service Manual.
2.
Operate door glass to the full up position and adjust the belt stabilizer to glass to reduce inboard-outboard movement.
3.
Remove bolts retaining front run channel to inner panel (2 locations).
FIGURE 1
4.
Using a 9 mm (11/32") drill bit, drill a new hole 8 mm (5/16") rearward of the existing hole at each location (Figure 1).
5.
Reinstall front run channel to new location.
6.
Before installing trim panel, operate glass while inspecting the smooth operation.
