Caprice V6-229 3.8L VIN K 2-bbl (1982)
Stabilizer Shaft: Service and Repair
Fig. 15 Stabilizer bar installation. Chevrolet, Malibu & Monte Carlo
CHEVROLET, MALIBU & MONTE CARLO
1.
Support vehicle at rear axle.
2.
Remove bolts securing stabilizer bar to lower control arms, Fig. 15.
3.
Reverse procedure to install. Use spacer shims, if needed, placed equally on each side of stabilizer bar. Tighten attaching bolts with vehicle at curb
height.
