Caprice V8-265 4.3L VIN W MFI (1995)
Knock Sensor Module: Service and Repair
PCM With Knock Sensor Module
Removing Knock Sensor Module From PCM
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Powertrain Control Module (PCM) from mounting bracket (refer to PCM removal).
3. Knock sensor (KS) module access cover.
4. Knock sensor module.
INSTALL OR CONNECT
NOTICE: To prevent possible electrostatic discharge damage to the PCM and KS module, Do Not touch the connector pins or soldered components on
the circuit board.
1. Knock senor module.
2. Access cover.
3. PCM to mounting bracket (refer to PCM installation).
4. Negative battery cable.
