chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

EGR Valve|Specifications|Page 4995 > < EGR Valve|Specifications|Page 4993
Page 1
background image

EGR Valve: Testing and Inspection

Too much Exhaust Gas Recirculation (EGR) flow dilutes the fresh intake air/fuel mixture, causing the engine to run roughly or stall. With too much
EGR flow (at idle, cruise, or cold operation) tends to weaken combustion and may result in any of the following conditions:

^

Engine stops after cold start.

^

Engine stops at idle after deceleration.

^

Vehicle surges during cruise.

^

Rough idle.

Too little or no EGR flow allows combustion temperatures to get too high during acceleration and load conditions. This could cause:
^

Spark knock (detonation).

^

Engine overheating.

^

Emission test failure.

For diagnosis of the EGR system refer to Computers and Control Systems / System Diagnosis / Procedures / Diagnostic chart C-7.

EGR Valve|Specifications|Page 4995 > < EGR Valve|Specifications|Page 4993