Caprice V8-265 4.3L VIN W MFI (1995)
Fuel Return Line: Service and Repair
Supply And Return Line Replacement
TOOLS REQUIRED
J 37088-A, Fuel Line Separator Tool Set.
NOTICE:
^
If nylon fuel feed or return pipes becomes kinked, and cannot be straightened, they must be replaced.
^
Do Not attempt to repair sections of nylon fuel pipes. If damaged, replace.
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Relieve fuel system pressure. Refer to Fuel Delivery / Service and Repair.
3. Quick-connect fittings at fuel rail in engine compartment.
4. Fuel feed and return pipe retaining clip at brake booster.
5. Raise vehicle.
6. Quick-connect fittings at fuel filter.
7. Lower fuel tank shield attaching screws and lower fuel tank shields.
8. Fuel feed, return, and EVAP pipe underbody retainer.
9. Quick-connect fittings at fuel sender assembly.
10. Fuel feed and return pipe retaining clips and fuel feed and return pipes.
^
Note position of fuel pipes for installation.
INSTALL OR CONNECT
WARNING: To Reduce the Risk of Fire and Personal Injury:
^
If nylon fuel pipes are nicked, scratched or damaged during installation, they must be replaced.
^
When installing new fuel pipes, Do NOT hammer directly on the fuel harness body clips as this may damage the nylon pipes resulting in a
possible fuel leak.
1. Lower vehicle.
