chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Recall - A/T Shift Control Linkage Adjustment|Page 5970 > < Recall - A/T Shift Control Linkage Adjustment
Page 2
background image

All unsold new vehicles in dealers, possession and subject to this campaign must be held and inspected/repaired per the service procedure of this
campaign bulletin before owners take possession of these vehicles.

Dealers are to service all vehicles subject to this campaign at no charge to owners, regardless of mileage, age of vehicle, or ownership, from this time
forward.

Owners of vehicles recently sold from your new vehicle inventory with no owner information indicated on the dealer listing, are to be contacted by the
dealer, and arrangements made to make the required correction according to the instructions contained in this bulletin.  This could be done by mailing to
such owners a copy of the letter accompanying this bulletin.  Campaign follow-up cards should not be used for this purpose, since the owner may not as
yet have received the notification letter.

In summary, whenever a vehicle subject to this campaign enters your vehicle inventory or is in your dealership for service in the future, please take the
steps necessary to be sure the campaign correction has been made before selling or releasing the vehicle.

Service Procedure

NOTE:

The shift linkage must be adjusted each time the transmission is replaced.

1.

Place vehicle on hoists. Place steering column range selector in the "N" (neutral) position.

IMPORTANT:

The vehicle must be at the correct trim height for proper linkage adjustment. The vehicle must be supported by all four (4) tires or by jack stands on
the rear axle tube such that the suspension is at the proper trim height.

2.

Loosen screw, automatic transmission range selector rod swivel (Figure 1, Item 816).

Recall - A/T Shift Control Linkage Adjustment|Page 5970 > < Recall - A/T Shift Control Linkage Adjustment